Concrete Sprayer Tank Holder - Fits Chapin® 19049

Bibow Industries’ Inc. PATENTED 9,027,785 Concrete Sprayer Tank Holder Fits Chapin® 19049. 

Made from 1/4"-3/16" mild steel.  This single concrete sprayer tank holder is fully welded and has 4+ holes for through bolts attachment to vehicle’s / shop floor.  Concrete Sprayer Tank holder is engineered with channels or troughs on the bottom to allow for condensation, water, liquids to escape.  SAFETY – the patented Concrete Sprayer Tank Holder contains a locking yellow "T" handle with locking Wing Nut to purposefully enable users to “LOCK” the Chapin® 19049 Sprayer into the Tank Holder - all with a simple Twist.  The 24" wand-guard™ has a wand-tip-protector™ and contains 2 wand-lock™ devices.  Top wand-lock™ is 1/2 of a Nite Ize® #3 Stainless Steel S-Biner.  The Nite Ize®  is covered with tubing to prevent chaffing, noise and to protect wand from vibration and shaking during transport.  Bottom wand-lock™  is a strategically attached orange Gear Tie® - designed to keep wand from vibrating and moving during transport. The CSTH sprayer holder is constructed from rigid steel to exceed ALL D.O.T. and O.S.H.A tank holder requirements*.  Painted with RUST-OLEUM® epoxy spray paint – “BECAUSE RUST SUCKS!©™” Purposefully engineered to last a lifetime!    

Bibow Industries Inc., TorchTips LLC, TorchTips Direct is NOT associated in any capacity with Chapin® Manufacturing Inc., or Chapin® International.  Chapin® or Chapin® 19049 are either registered or unregistered trademarks of Chapin® Manufacturing Inc., or Chapin® International Inc. Chapin® 19049 is shown for illustrative / functional purposes only. 

• CSTH Prevents Concrete Sprayer from rolling around, shifting in truck, van or vehicle
• Holds Concrete Sprayer in a vertical, upright position - D.O.T & O.S.H.A compliant
• Wand-Guard™ protects 24" 19049 extension wand
• Wand-Tip-Protector™ protects the brass wand tip end
  
• Top wand-lock™ is 1/2 of a Stainless Steel #3 S-Biner by Nite Ize®
  
• Bottom wand-lock™ 12" orange Gear Tie® by Nite Ize®
  
• 3/16+" steel bottom plate with 4+ through-bolt attachment holes - locks holder into vehicle
• 3/16+" steel bottom plate takes "TANK IMPACT", NOT the floor of vehicle
• 3/16+" steel Concrete Sprayer Tank receiving section
• Sleeve is 6.5" tall: With Tab-Lock™ for Chapin® 19049 "Tab in" or "Tab Out"
• 8.85" inside diameter or ID to allow for Chapin®19049 "Tab-In" or "Tab-Out" securement
• 10.5" x 9" base plate
• 1.25" yellow Locking "T" Handle with 3/8" Jam Nut
• Welded inside and out
• Threaded locking yellow "T" Handle to lock Concrete Sprayer into the Holder
• Weighs over 10 lbs
  
• Empowers contractors to DEMAND vehicle insurance premium REDUCTION!
• RUST-OLEUM® – “BECAUSE RUST SUCKS!©™” 

INFORMATION SOURCE:  
PHOTO(S) / JPEG(S)  ARE EXCLUSIVELY OWNED BY TORCHTIPS, LLC, BIBOW INDUSTRIES, INC AND TORCHTOOLS, INC
INFORMATION PROVIDED FOR INFORMATION PURPOSES ONLY.  SUBJECT TO CHANGE BY SOURCE OWNER AND/OR TORCHTIPS.COM  
Bibow InDUSTRIES R&D and public Chapin MFG data SheetS for 19049 as of January 2018 and INTERNET DATA on CHAPIN 19049

Bibow Industries INc, TorchTIps.com, torchtips Direct is not associated with CHAPIN®  INDUSTRIES or Chapin® international in any capacity.
Chapin® and/or CHAPIN® 19049 are either registered or unregistered trademarks of Chapin® Manufacturing Inc., and/or Chapin® International and is used for reference / illustrative purposes only.

BIBOW INDUSTRIES, TORCHTIPS.COM, TOrchtipd direct IS NOT ASSOCIATED WITH Nite Ize  Inc,  
Gear Tie® and Nite IZE® are registered trademarks of Nite Ize, Inc. and is used for reference purposes only

TORCHTIPS.COM CANNOT GUARANTEE THE ACCURACY OR TIMELINESS OF THE INFORMATION. 
(C) (TM) 2018 ALL IMAGES, ALL CONTENT, ALL TRADE DRESS, ALL RIGHTS RESERVED, NOT TO BE STOLEN, STORED, COPIED, CALLED OR REFERENCED IN ANY MANNER IN OR ON ANY DEVICE, DATABASE OR DATA STRUCTURE OR IN ON ANY DEVICE OR VIRTUAL ENVIRONMENT OR SERVER. ALL RIGHTS RESErVED.